Water Conditioners

Salt-Free Water Conditioner

The Zenith Salt-Free Water Conditioner is a whole-home alternative to a salt softener. Its FILTERSORB® SP3 media changes how hardness minerals behave, so they are less likely to form scale on pipes, fixtures and appliances. It uses no salt, no electricity and no drain, and it wastes no water.

  • Whole-home alternative to a salt softener
  • Reduces hard water scale
  • FILTERSORB® SP3 media
  • No salt to buy
  • 5 years parts, 5 years labor
  • Financing available

5-year parts and 5-year labor cover · Financing available

How a salt-free conditioner works

The media is FILTERSORB® SP3. Water flows up through a bed of modified ceramic beads. These convert dissolved calcium bicarbonate into stable aragonite crystals of calcium carbonate. The crystals carry no charge and resist heat, so they cannot bond to pipes, fixtures or heating elements. They stay suspended and rinse away in the flow. The process is called Nucleation Assisted Crystallization, or NAC. Contact time is around five seconds whatever the hardness level.

What it does, and what it does not

It doesIt does not
Reduce hard water scale on pipes, fixtures and appliancesRemove calcium or magnesium from the water
Keep the natural minerals in your waterProduce true soft water, as a salt softener does
Run with no salt, chemicals, regeneration, electricity or wastewaterImprove lather, soften skin or cut soap use
Remove scale that has already built up, over time
Add no sodium to your water
Leave TDS and pH unchanged

SP3 does two jobs. It stops new scale forming, and it works back through existing scale on pipes and heating surfaces over time. Supplier testing on commercial coffee machines found SP3-protected equipment stayed markedly cleaner than machines descaled by hand every month.

Who it suits

  • City water homes that mainly want scale protection with very little upkeep
  • Homes with limits on water softener discharge
  • Households that prefer no salt bags, no wastewater and no electricity

Specifications

FeatureDetail
System typeWhole-home, point-of-entry anti-scaling conditioner
MediaFILTERSORB® SP3 scale-prevention media
Media certificationFILTERSORB® SP3 is certified to ANSI/NSF 61 by WQA for drinking water material safety. This certifies material safety only, not scale performance.
Water sourceCity water only. Not suitable for well water.
Pre-filter1 inch x 10 inch Big Blue carbon pre-filter included. Keeps free chlorine under the media limit.
Tank8 inch mineral tank with a Vortech distribution plate. Larger sizes quoted case by case.
Flow directionUp-flow. No control valve, no drain and no power connection.
Salt, power and drainNone needed
Operating limitsHardness up to 75 grains per gallon
pH 6.5 to 9.5
Iron up to 0.5 ppm
Manganese up to 0.05 ppm
Copper up to 1.3 ppm
Free chlorine up to 3 ppm
Not for water containing oil or hydrogen sulfide
UpkeepMedia life 3 to 5 years, depending on feed water. Assessed at every annual service. Replaced at end of life rather than recharged.
SupplyBuilt to order, 3 to 5 day lead time.
Warranty5 years on parts, 5 years on labor. Written terms apply.

Salt-free conditioner or water softener

Salt-free conditionerWater softener
How it worksChanges hardness minerals so they are less likely to form scaleRemoves hardness minerals by ion exchange
ResultLess scale, minerals stay in the waterTrue soft water at every tap
SaltNoneNeeds salt
Drain and powerNoneBoth needed
UpkeepMedia every 3 to 5 yearsSalt top-ups

Questions

Do salt-free systems really work on hard water?

They are effective at reducing scale on pipes, fixtures and appliances, particularly on city water with moderate hardness. They do not produce soft water the way a salt softener does.

Is a salt-free conditioner right for my Indianapolis home?

It suits homes that want scale protection without the salt and upkeep of a softener. Indianapolis water is very hard, so if you want soft water at every tap, a softener is the better fit. We tell you which one your water calls for after the free test.

Can I use it with water filters?

Yes. Pairing a salt-free conditioner with a carbon water filter is one of the most popular setups we install.

What upkeep does it need?

Very little. There is no salt to buy, no regeneration and no backwash. FILTERSORB® SP3 media lasts 3 to 5 years depending on feed water. We assess it at every annual service.

Does a salt-free conditioner soften water?

No. It is a conditioner, not a softener. A softener removes calcium and magnesium by ion exchange. This system leaves those minerals in the water and changes how they behave so they cannot deposit as scale. A hardness test after the system reads the same as before it.

Will my water still test hard?

Yes. The minerals are still in the water, so a hardness test reads the same. What changes is that the hardness can no longer form scale on pipes, fixtures and appliances. If you want soft water and soft-water feel, you want a water softener instead.

Can I use a salt-free conditioner on well water?

No. This is a city water product. Iron above 0.5 ppm, manganese above 0.05 ppm or any hydrogen sulfide will foul the media. Those are common well water conditions. For a private well, start with a water test and a well water system.

Does it add sodium to my water?

No. Nothing is added and nothing is removed. There is no sodium, no phosphate and no change to the water TDS or pH. The calcium and magnesium stay in the water as dissolved minerals, in a form that no longer deposits as scale.

Related: water softeners, water filters and whole home bundles.

Book your free water test

We test your water at home, show you your Zenith Water Health Index score and give you a written quote. No obligation.

Or call (317) 690-4172

Why Zenith

  • Free in-home water test with your Water Health Index score
  • Written quote before any work starts
  • Premium components as standard
  • Local installation and service
  • Financing and trade-in credit available

★★★★★

Rated 5.0 on Google.

Family holding glasses of clean water at home

Get started

Find out what is in your water

The in-home water test is free. We test your water, show you your Water Health Index score and give you a written quote, with no obligation.