Columbus gets all of its public water from groundwater, and it is very hard. Columbus City Utilities reports an average of 335 ppm, or 19.6 grains per gallon, in its 2025 water quality report. Zenith tests your water at home for free and sizes a softener to the number at your tap.
Or call (317) 690-4172.
Columbus water at a glance
| Water supplier | Columbus City Utilities |
| Source | Groundwater from 26 wells, treated at two filtration plants |
| Reported hardness | Average 335 ppm (19.6 grains per gallon). Range 328 to 344 ppm. |
| Disinfectant | Chlorine |
What that means in your home
The U.S. Geological Survey calls water very hard above 180 ppm. Columbus’s average of 335 ppm is almost twice that. The range in the city’s report is narrow, 328 to 344 ppm, so most homes on city water see about the same hardness all year.
Hard water shows up as spots on dishes, scale on faucets and shower doors, and extra wear on appliances that heat water.
What we install in Columbus
Which one a Columbus home needs depends on the water test: a water softener for the hardness, a whole house water filter for chlorine taste and odor, a reverse osmosis water filter as the drinking water system at the kitchen sink, or a combination. If your home is on a private well, we build the well water filtration around the same free test. Prefer to rent? Water softener rental is available in Columbus on a 36-month plan.
- Water softeners. The Essential Series and Performance Series, in 32,000 to 80,000 grain, single or dual tank.
- Reverse osmosis. The tankless Guardian RO800 under the kitchen sink, for drinking and cooking water.
- Whole-home filters. Carbon filtration for chlorine taste and odor.
- Well water treatment. Systems for iron, sulfur odor, sediment and hardness on private wells.
How it works
- Free water test. A technician tests your water at your home and gives you a written report the same day, with your Zenith Water Health Index score.
- Written quote. You see the price in writing before any work starts.
- Installation. Our own installers fit the system, usually in 2 to 4 hours.
Questions
How hard is Columbus, Indiana water?
Columbus City Utilities’ 2025 report lists an average of 335 ppm, or 19.6 grains per gallon. That is very hard on the U.S. Geological Survey scale.
Where does Columbus get its water?
All of it is groundwater. The city’s report says it comes from 26 wells and two filtration plants.
What should I set my water softener to in Columbus?
The city average is 19.6 grains per gallon. We set your softener from the hardness we measure at your home.
Do you come out to Columbus?
Yes. Columbus is within our service area, which runs up to about two hours from our shop on East 30th Street in Indianapolis.
Water facts from Columbus City Utilities’ 2025 Drinking Water Quality Report and the U.S. Geological Survey, checked November 2026. Hardness varies by address and season.
Nearby: Greenwood. See all service areas, or read our Indianapolis water hardness guide to compare towns.
